Post by yugiohpinas on Aug 23, 2006 14:10:01 GMT 7
users.ameritech.net/pakrats/apprentice_pojo_com.zip
after downloading the apprentice software....
users.ameritech.net/pakrats/POTD-Patch.zip
how to combine the two: (from POJO site)
-------------------------------------
HOW TO INSTALL PATCH:
-------------------------------------
1. Make sure Apprentice is closed if you have it open.
2. Extract all the contents of this ZIP file to your default Apprentice directory. If you installed Apprentice with an installer, it should be C:/Apprentice. If you got an extractable version of Apprentice, it's wherever you decided to extract it.
3. When prompted to overwrite files, choose "Yes to All." The following files will be overwritten in the main directory: cardinfo.dat, Distro.dat, Expan.dat, Format.dat, Rules.dat, and README.txt. The second cardinfo.dat file is set to go into the Sets folder, and will overwrite the cardinfo.dat there.
4. Open Apprentice and check the Card Editor. If you see Yu-Gi-Oh cards (beginning with a card named "_Pojo's Yu-Gi-Oh_"), then you've installed correctly.
----------------------------------------------------
IF YU-GI-OH CARDS DO NOT SHOW:
----------------------------------------------------
If you've followed the above steps EXACTLY and the cards do not show up, try a few more times. If they still do not show, then do the following:
1. Make sure Apprentice is closed if you have it open.
2. Go to your main Apprentice directory and delete the following files: cardinfo.dat, Distro.dat, Expan.dat, Format.dat, Rules.dat, and README.txt.
3. Open the Sets folder and delete the file cardinfo.dat.
4. Extract the patch to your Apprentice directory once more. You will not be prompted to overwrite any files, because you have deleted them.
5. Double check in your main Apprentice directory to make sure the files have re-appeared.
6. Double check in the Sets folder to make sure the second cardinfo.dat showed up. If it did not, go back to the main directory, select the cardinfo.dat there and hit Ctrl+C. Then go back to the Sets folder and hit Ctrl+V.
7. Open Apprentice and check the Card Editor. If you see Yu-Gi-Oh cards (beginning with a card named "_Pojo's Yu-Gi-Oh_"), then you've installed correctly.
after downloading the apprentice software....
users.ameritech.net/pakrats/POTD-Patch.zip
how to combine the two: (from POJO site)
-------------------------------------
HOW TO INSTALL PATCH:
-------------------------------------
1. Make sure Apprentice is closed if you have it open.
2. Extract all the contents of this ZIP file to your default Apprentice directory. If you installed Apprentice with an installer, it should be C:/Apprentice. If you got an extractable version of Apprentice, it's wherever you decided to extract it.
3. When prompted to overwrite files, choose "Yes to All." The following files will be overwritten in the main directory: cardinfo.dat, Distro.dat, Expan.dat, Format.dat, Rules.dat, and README.txt. The second cardinfo.dat file is set to go into the Sets folder, and will overwrite the cardinfo.dat there.
4. Open Apprentice and check the Card Editor. If you see Yu-Gi-Oh cards (beginning with a card named "_Pojo's Yu-Gi-Oh_"), then you've installed correctly.
----------------------------------------------------
IF YU-GI-OH CARDS DO NOT SHOW:
----------------------------------------------------
If you've followed the above steps EXACTLY and the cards do not show up, try a few more times. If they still do not show, then do the following:
1. Make sure Apprentice is closed if you have it open.
2. Go to your main Apprentice directory and delete the following files: cardinfo.dat, Distro.dat, Expan.dat, Format.dat, Rules.dat, and README.txt.
3. Open the Sets folder and delete the file cardinfo.dat.
4. Extract the patch to your Apprentice directory once more. You will not be prompted to overwrite any files, because you have deleted them.
5. Double check in your main Apprentice directory to make sure the files have re-appeared.
6. Double check in the Sets folder to make sure the second cardinfo.dat showed up. If it did not, go back to the main directory, select the cardinfo.dat there and hit Ctrl+C. Then go back to the Sets folder and hit Ctrl+V.
7. Open Apprentice and check the Card Editor. If you see Yu-Gi-Oh cards (beginning with a card named "_Pojo's Yu-Gi-Oh_"), then you've installed correctly.